HSM7
Re: HSM7
Hi
The blue one is a siren of my own construction, which I built three years ago!
The rotor and motor is compact. This unit is a galvanized steel blower used in industrial fans etc.
The stator and body made by plastic.



The blue one is a siren of my own construction, which I built three years ago!
The rotor and motor is compact. This unit is a galvanized steel blower used in industrial fans etc.
The stator and body made by plastic.




Zuletzt geändert von orestis am Samstag 15. April 2006, 17:27, insgesamt 1-mal geändert.
Re: HSM7
well, as you understand the rotor is not special for sirens and its vanes are not square and they don't "fit" the holes.
For that reason the sound is not as loud as if the rotor was special. (considering the size)
Though, in full speed 2630 rpm I measured ~100 - 105 dB and frequency 482 Hz
I' ll try to record the sound and post it here
For that reason the sound is not as loud as if the rotor was special. (considering the size)
Though, in full speed 2630 rpm I measured ~100 - 105 dB and frequency 482 Hz
I' ll try to record the sound and post it here
Re: HSM7
I recorded my own construction siren.
The file isn't very clear, but here it is:
http://media.putfile.com/electra-14
The file isn't very clear, but here it is:
http://media.putfile.com/electra-14